Beko Dishwasher Heating Element - 1800W Stock Number: ES1250400
Spare part for select models of Beko, Diplomat, Amica, Teka, Blomberg and Howden dishwashers
Manufactured by Beko
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Heating Element - 1800W
If the water in your dishwasher is not to its usual warm level, there could be a faulty element. If your water is not hot, it will result in a poorer cleaning performance, and your dishes and cutlery will not come out as clean as you would expect.
eSpares has this replacement heater, that could soon be yours to restore the water temperature - and great cleaning results - that you have been used to.
Specification:
- 1800 Watts
- Type: Flow-through
- 230 Volts
- Length: 145 mm
Spare part for select models of Beko, Diplomat, Teka, Blomberg and Howden dishwashers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
13 Questions and 11 Answers
-
eSpares Staff at eSpares says...
You would normally replace with the existing clips on the machine if you need to replace they are available on our website.
Dishwasher does full cycle but is cold no heat how do you test the go through heater element the other type of element you do a low resistance test on each end.
-
Chris at eSpares says...
Measure with a multi meter across the two connections there should be a resistance of under 30 ohms.
when my beko dw603 dishwasher is switched on ,after a couple of minuites . it trips out on the consumer unit 1 Answer
-
Chris at eSpares says...
The problem is likely to be the heating element failing.
-
Chris at eSpares says...
For information on this problem see our diagnosis video: How to Diagnose Dishwasher leaking and heating problems www.espares.co.uk/advice/3/2083
Hi my DSFN 1534s Beko dishwasher is working the wash cycle as normal but has stopped on the end of wash and the drying and end lights never come on any more :/ which part do I need to replace please? I know it's hot air but can't seem to find the relevant part :( thanks
-
Chris at eSpares says...
For information on this problem see our diagnosis video How to Diagnose control and programme problems with a dishwasher: http://www.espares.co.uk/advice/3/1985
Will this part fit my appliance?
Check Now
