Get The App From Play Store!

Skip to main content

Bosch Oven Lamp Cover Remover Tool - 63mm Stock Number: ES1123507

Removal tool for removing the oven light cover on most Bosch, Neff and Siemens cookers

Read more

Manufactured by Electruepart

(This part fits select Bosch models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Oven Lamp Cover Remover Tool - 63mm

If you are having trouble removing the cover on the lamp in your oven, eSpares could possibly help you out! We have this lamp cover removal tool that could soon have that cover removed, ready for you to be on the way to bringing light back into your oven again!

Specification:

  • Diameter: 63mm
  • Dismounting tool for the oven lamp glass cover
  • Put on the Auxillary tool and turn Anti-Clockwise to loose - turn Clockwise to tighten

Spare part for select models of Bosch, Neff and Siemens cookers.

Please check the diameter of the cover you wish to remove, to ensure that this is an appropriate tool to use.

Ask a Question

38 Questions and 41 Answers

The Lamp Cover remover tool has just been delivered. Neither of us are able to turn it and remove cover. Is there a technique/trick to this? Thank you.

By Gadgetmad - Reading - 15 December 2012
  • I tried first by hand no go ,so I put on a pair of rubber gloves no problem the cover unscrewed without difficulty PS the oven was only 6 months old I am now going to look for a better designed bulb with an improved filament By Tomfitz - Bristol - 15 October 2013
  • Hi Gadgetmad. When the oven is cold, Play the hot air from a hair dryer over the glass surface for a few minutes. Start off on a low heat first. This should expand the glass cover a little to release the bond. This tip is a bit late as I have just seen your post. By Joseph - - 25 February 2013
  • I just bought one of these gizmos before Xmas and it did the trick immediately. No messing. Worked first time. You have to line up the 'fins' on the glass cover to the recesses in the gizmo. It is quite a secure fit when you get it on. It should just slide on and a sharp twist ANTI clockwise should do it. Make sure you are turning it to the left as you look at the light. Perhaps the glass housing is stuck on with oven / cooking deposits? Try some oven cleaner to free it perhaps? Good luck. By Anonymous - Somerset - 08 January 2013
Answer this question
By K - Surrey - 16 May 2015
  • Chris from eSpares
    Chris at eSpares says...

    This does fit a u1644 model but may not fit all Bosch Neff or Siemens ovens.

  • I have a bosch oven unfortunately it did not work By F s - Uk - 25 February 2016
Answer this question

hi have Electrolux ekt6045x 94852217200 an extra large? lense will this fit this model???

By PG - sunderland - 19 February 2018
  • Chris from eSpares
    Chris at eSpares says...

    We do not think this will fit your model

Answer this question
By sergei - London - 03 January 2018
  • Chris from eSpares
    Chris at eSpares says...

    THis is not designed for Smeg products and may not fit.

Answer this question
By Susan - - 06 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    We are not aware of a removal tool for Miele ovens. If it is stuck use WD40 around the edge when the oven has been warmed and hold a tea towel over the lamp lens when removing to help grip.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Oven Lamp Cover Remover Tool - 63mm

9.79
(inc. VAT)
9.79