Zanker Cooker Hood Active Carbon Filter for KRT260W Stock Number: ES1066276
Genuine spare part for select models of Zanussi, Electrolux and AEG cooker hoods
Manufactured by Zanussi
(This part fits select Zanker models)
Will this part fit my Appliance?
Check this part fits your appliance
Cooker Hood Active Carbon Filter
Your cooker hood's charcoal filter is responsible for trapping food odours and grease, and re-circulating fresh air. Replace your carbon filter regularly to keep your extractor fan working its magic.
It is recommended to change your carbon filters every 6 months (or when the filter is heavily soiled). With the help of eSpares and this replacement filter, you will get your cooker hood back to doing what it does best - eliminating cooking odours!
Specification:
- Type: EFF54
- Diameter (H x D) 34mm x 233mm
- Sold individually
- Europe Version with Screw and Bayonet
Genuine spare part for select models of Zanussi, Electrolux and AEG cooker hoods.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
Please note: This part is PNC (product number) dependent, prior to ordering please check that your model and PNC are listed under the list of appliances.
11 Questions and 11 Answers
When the cooker hood is in the recirculation mode should a charcoal filter also be fitted on top of the grease filter even if a carbon hood filter is already in place? 1 Answer
-
Chris at eSpares says...
using a carbon filter will help reduce smells when recirculating the air on a cooker hood.
Model ZAMUSSI ZBW965 nUMBER 940429586
-
Chris at eSpares says...
You will have to open the hood by removing the grill in a similar way to that shown in the video. Inside you will see the motor assembly with the carbon filters fitted on either side (unless it vents outside and they are not fitted). To remove the filters you normally rotate them to unlatch and lift off.
i have been told to pull the clips over on either side and the top should come over and makeing acess but it dosn't come over at all i have had this hood for about 10years
- On mine theres a disc in the middle of the filter you just unscrew, replace with new 1 & rescrew in the disc
how do i get to and remove the old charcoal filters to replace them on electrolux efc60001K cooker hood 1 Answer
- Slide in tabs each side to drop down cooker hood, hinged at back, with fabric filter fitted underneath. The carbon filter is exposed and is situated in the centre of the hood. Turn the round plastic centre anti clockwise to release the old filter. Do the same in reverse to fit the new filter.
My electrolux EFI 625 has stopped working, do I need to change the carbon filter or is it just the grease filter & bulbs i need to change? 1 Answer
-
eSparesMalindi at eSpares says...
Please contact a technician for support because we cannot give technical advice unfortunately.
Will this part fit my appliance?
Check Now
