Answer this Question (4 Answers)

• Hi, I fitted one to a hoover nextra HNF7148-80. I required a 7mm spanner and socket, a screw driver to leaver the front retaining ring off and some washing up liquid to lubricate the inner door seal to help fitting. (well worth doing) Regards and good luck By tptclarke - Cornwall - 24 May 2010
• Strength, patience, a couple of small adjustable spanners and a flat head screwdriver. Best of luck - the online video is very helpful but it is not a 5 minute job. By harttss3 - Berkshire - 11 March 2010
• Washing up liquid, small screw driver, and 1/4" drive small socket (7mm and 8mm i think) and spanner By m4rkp - Slough - 02 March 2010
• 

  Rory at eSpares says...

  Hi Giby This door seal is suitable for your Hoover HNF2137S-80 washing machine. For help fitting it, use our handy guide: http://www.espares.co.uk/guides/washing-machines/g/12/38/replacing-door-seals.html