Make sure that cooking vapours and smells are extracted properly by taking care of your extractor fan. Here eSpares explain how cooker hoods work so that you'll know what needs replacing if something goes awry.
Hi I'm Matt from eSpares.
In this video I want to talk to you about cooker hoods and what you can do to make sure that the smoke and smells that come from your cooking are extracted properly.
Now, cooker hoods come in all different shapes and sizes, but there are basically just two types. Those that vent externally - the extractor fan draws the air up through some ducting and it is expelled outside the property, and those that re-circulate the air back into the kitchen - and that's the sort that you'll almost certainly have if your cooker is not near an external wall.
Both types will have a grease filter, and that's just to stop the fan and the inside of the cooker hood getting all caked in grease. Two main types, these fabric ones which are designed to be folded or cut to size, they're disposable and these saturation indicators, usually either dots or stripes, they change colour to let you know when it's time to replace them.
Now the other type, like I've got on my cooker hood here, are these wire mesh filters, these are designed to be cleaned. All you need to do is take that out, put it in the sink, give it a good spray with a decent oven spray and then pour over boiling water. If yours are beyond the pale, then they are replaceable as well.
Whichever type you've got, you do need to keep them clean, because the last thing you want is fat dripping down onto your food as it's cooking.
Finally all cooker hoods have a light, they are very often the small screw or SES type, you can see I've actually replaced mine with spiral energy saver bulbs, they not only last a lot longer, but they save you a lot of energy as well. Whatever type of cooker hood you've got, replacement filters and spare parts are available on the eSpares website.
Thanks for watching.