Washing Machine Door Seal Stock Number: ES800521
Genuine spare part suitable for select models of Hotpoint, Ariston and Indesit washing machines
Manufactured by Indesit
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Door Seal
If you have just come to remove the washing out of the washing machine, to find that water has leaked out of the machine, it sounds like it could be a faulty door gasket. eSpares can help you solve the problem and prevent further accidents with this replacement spare door seal.
We can soon help to get you back to having confidence that when you put the washing on, the water will remain on the inside of the appliance - and not on your floors. With help from eSpares, and our compatible door seal, you will soon have a fully working washing machine again - so you can get through the laundry that has piled up!
Genuine spare part suitable for select models of Hotpoint, Ariston and Indesit washing machines.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
4 Questions and 4 Answers
Do I need any of the clips to fit this or can I reuse the seal clips on the machine already? 1 Answer
-
Chris at eSpares says...
It should be possible to reuse the clamp bands when replacing a door seal.
Hi Espares, I have a wdl540 which is leaking from bottom front and the dispenser unit at the end. Would replacing the door seal resolve the issue or do I need to get any other parts? Thanks in advance and I am very pleased to have found your site. :-)
-
Chris at eSpares says...
The problem is likely to be due to mould in the dispenser spray jets above the drawer. Clean with a dish brush or replace as required. See our video: http://www.espares.co.uk/advice/7/2307/indesit-washing-machine-detergent-dispenser-problems-and-replacement-
To replace the door seal do I need any other parts apart from the door seal itself, my washer is leaking from the front inside so I suspect its the door seal. 1 Answer
-
Chris at eSpares says...
Carefully examine the door seal as you should be able to find a hole in it if it is the culprit. On Hotpoint machines the cause of leaking can be from the soap drawer on the final rinse. Select a rinse cycle and watch it to see if this is the cause. If the water is leaking from the dispenser it will be due to black mould causing the spray to come over the drawer, clean the spray jets and see our video: http://www.espares.co.uk/advice/3/1524/how-to-use-limescale-and-detergent-remover
I have the WD420P and I had problems with the dryer element tripping out all the time so they replaced the element with a newer version which dries quicker but also runs hotter and it has melted the seal around it. Will this seal also be uprated so that it can withstand the heat of the new version of the dryer unit. Thanks
-
Rory at eSpares says...
Hi Guyhall, this will fit your WD420P, however I can't guarantee the malfunctioning element won't melt it.
Will this part fit my appliance?
Check Now
