Skip to main content

Call 1800 936 660

How to Fit Spool & Line in Your Black & Decker Strimmer

Eventually the line in your trimmer will run out and when it does you won’t need to replace the entire machine.

You can either purchase the spool and line with the cover, this is great if your existing cover has become damaged. Or if your original cover is fine you can just purchase the spool and line.

This guide talks you through the replacement process for changing your spool and line with and without a replacement cover.

This video shows an example on how to remove or replace the part on a typical machine, some models may be different but the procedure should be similar.

What You Will Need:

  • Spool & Line or Spool, Line and Cover

 

Safety First! Please ensure that you have disconnected the appliance from the mains before starting any repair.

Spool and Line

Step 1 - Remove the Spool and Cover

To replace both the spool and line, you simply need to remove the existing spool cover and spool. 

Step 2 - Replace the Spool and Cover

Once removed you can then replace it with the new spool and cover. 

Step 3 - Uncleat the Line

When you’ve connected it onto your strimmer you will need to uncleat the line and feed it through the eyelets to ensure it does the job.

Spool

Step 1 - New Spool and Old Cover

Remove the existing spool and cover, and fit the spool and line into the old cover.

Step 2 - Uncleat the Line and Feed the Cover

Unclear the line and feed it through the eyelets on the cover.

Step 3 - Bringing it All Together

Once you have the line fed through the eyelets you can now fit the spool and cover back onto the strimmer.

After following either, you will now be able to now continue to trim your lawn.


Print Article Print this article